Werkzeuge Werkstatt

Diese Ersatzstifte aus gehärtetem Stahl passen für die Kettennieter-Modelle CT-1, CT-2 und CT-3.

Lieferbar in den Durchmessern 8mm und 10mm.

Komfortabler und haltbarer Schraubendreher in Profiqualität. Handgriff aus Zwei- Komponentenmaterial, Schaft und Spitze aus wärmebehandeltem Chrom-Vanadium. SD-0 // #0 Kreuzschlitz • SD-2 // #2 Kreuzs

Dieses Paar Ersatzstifte aus gehärtetem Stahl passen für den Mini-Kettennieter CT-5.

Das CNW-2 erleichtert die Montage und Demontage der Kettenblattschrauben. Es hält die geschlitzte Mutter sicher, wenn die Schraube gelöst oder angezogen wird. Zweiseitig für die meisten Schraubentypen

Kit de clés hexagonales.
Tailles : 4, 5 et 6 mm

Outil pour pédalier haute qualité.
Facilite le serrage des contre-écrous.
Convient à la plupart des contre-écrous.

FEATURES

■ Compact CrMo spoke wrench.
■ For spoke diameters: 3.2 / 3.3 / 3.5 / 4.0 (0.127 / 0.130 / 0.1

clés à cônes durables.

Disponible de 14 à 17mm.

Metric Wrench CBW-1

The CBW-1 is an 8mm open and 10mm open end wrench. This small, nickel plated wrench can be used on brakes, derailleurs, etc. Hole in wrench allows easy hanging on peg b

ITEM # RR-12
Tape Measure Small and handy, the RR-12 features a tough, composite housing a

Offset Brake Wrench OBW-1

We call the OBW-1 an offset wrench because of the unique design, which allows it to be used in tight places, such as centering caliper brakes.
OBW-1 has 10mm

HR 8 Hex wrench 8 mm

This is a professional quality, L-shaped, 8mm hex wrench for installing and removing crank bolts with an 8mm socket.
Special "speed bearing" attachment facilitat

Double-ended cone wrench

These 11/12mm double ended cone wrenches are designed for the home mechanic or occasional user.
They're made of thin tool steel and are nickel-plated for long

Schlussel zur Montage der Kettenblätter
Für eine schnelle Montage der Kettenblätter.
Die Zusatzfunktion ermöglicht, die Staubkappe
des Kurbelams zu lösen.
Rutschfester Griff

Metric Wrench CBW-4

The CBW-4 is a 9mm open and 11mm open end wrench.
This small, nickel plated wrench can be used on brakes, derailleurs, etc.
Hole allows easy hanging on peg b

Spoke Wrench (105 ga./.156 nipple)SW-3 with blue handle

Professional quality, precision-sized spoke wrenches are hardened and chrome plated for long service.
Park Tool Spoke Wrenches

Spoke Wrench (80 ga./.130 nipple)SW-1 with green handle

Professional quality, precision-sized spoke wrenches are hardened and chrome plated for long service.
Park Tool Spoke Wrenches

Spoke Wrench (80 ga./.127 nipple)SW-0 with black handle

Professional quality, precision-sized spoke wrenches are hardened and chrome plated for long service.
Park Tool Spoke Wrenches

Kit de purge de frein hydraulique. Liquide minéral, joints etc..

simple d'emploi, il indique si la chaîne a atteint un niveau d'usure de 0.75% ou 1%. Vous savez ainsi si votre chaîne est à remplacer.

Spoke Wrench (80 ga./.136 nipple)SW-2 with Red handle

Professional quality, precision-sized spoke wrenches are hardened and chrome plated for long service.
Park Tool Spoke Wrenches ar

Pin Spanner SPA-2

The SPA-2, with red handle, will fit one-key release retaining rings on Shimano® and Campagnolo® cranksets and the adjusting cone on most freewheel clusters (not freehubs)

Dieses Werkbankzubehör sorgt für sichere Aufbewahrung metallischer Kleinteile.
Die blaue MB-1 beinhaltet einen extra starken Magneten und hat einen Durchmesser von 15 cm.

Tacx Dérive-Chaîne T3250

Standard chaînes 1/2 x 1/8 .
Convient particulièrement aux chaînes BMX.

Caractéristiques :
L

Pin Spanner SPA-1

The green handled SPA-1 fits adjusting cup on many adjustable type bottom brackets.
The pin ends are round with a diameter of 2.9mm.
Park Tool Pin Spanners hav

clé à pédales ergonomique. Crochets extra larges et très solides. Permet d'installer ou démonter rapidement les pédales.

Fouet à chaîne.

Caractéristiques : il maintient en place les pignons lors du démontage de l'écrou de serrage des cassettes. Egalement pour démonter une roue libre.

Freewheel Remover FR-3

Fits all Sun Tour® four notch freewheels since 1986.
Heat treated alloy tool steel, one inch base fits wrench or bench vise.
Thin wall construction allows

Cassette Lockring Remover FR-5

Fits most cassette lockrings including Shimano®. (
Note: You must hold freewheel with chain whip tool such as the Park Tool Sprocket Remover SR-1 o

Offset Brake Wrenches OBW-3

We call these our offset wrenches because of their unique design, which allows them to be used in tight places, such as centering caliper brakes.
OBW-3 has

Triple Spoke Wrench SW-7

The SW-7 is electroless nickel plated for years of service.
The precision sized SW-7 fits the three most popular spoke nipple sizes on the market.
The t

ITEM # HT-6
Hex Tool, 6mm Specially designed for cranks and pedals the HT-6 tool

Hex Wrench Set AWS-10

The AWS-10 combines all the popular sizes in one convenient, super tough fold-up.
Each hex is made of 8650 industrial strength chrome vanadium tool steel with ch

Freewheel Remover FR-2

Fits old style Sun Tour® two notch freewheels.
Not recommended for Sun Tour® four to six notch freewheels.
Heat treated alloy tool steel, one inch base fi

Spoke, Bearing, and Cotter Gauge SBC-1

This handy shop aid is ideal for sizing spokes, ball bearings and crank cotters.
To use, just hang the head of the spoke in the oblong hole and

Freewheel Remover FR-1

Fits all Shimano® freewheels since 1985, Uniglide® before 1985; S.I.S. and Sachs® Aris freewheels.
Heat treated alloy tool steel, one inch base fits wrench or b

Shop Cone Wrench 13mm SCW-13

The standard of the industry, Park Tool Shop Cone Wrenches are unmatched in quality and performance.
The special Y head design puts more material where it

Freewheel Remover FR-4

Fits Atom®, Regina®, splined Zeus®, and some Schwinn® Approved freewheels.
Heat treated alloy tool steel, one inch base fits wrench or bench vise.
Thin wall