Park Tool Tools

These pins fit Park Tool’s CT-1, CT-2, CT-3 and CT-7 Chain Tools. Made from hardened alloy tool steel.

Shop quality screwdriver designed for comfort and durability. Featuring dual density grips and heat-treated, chrome vanadium tips and shafts.
The #0 is a 1/8" shaft, for those small comp

These pins, fit Park Tool’s CT-5 Mini Chain Brute Chain Tool. Made from hardened alloy tool steel.

GearClean Brush GSC-1

Park Tool's patented GearClean Brush has a unique design.
A large comfortable handle with a curved, toothed-end reaches dirt deep between the gears, and tough ny

Metric Wrench CBW-1

The CBW-1 is an 8mm open and 10mm open end wrench. This small, nickel plated wrench can be used on brakes, derailleurs, etc. Hole in wrench allows easy hanging on peg b

ITEM # RR-12
Tape Measure Small and handy, the RR-12 features a tough, composite housing a

Offset Brake Wrench OBW-1

We call the OBW-1 an offset wrench because of the unique design, which allows it to be used in tight places, such as centering caliper brakes.
OBW-1 has 10mm

Metric Wrench CBW-4

The CBW-4 is a 9mm open and 11mm open end wrench.
This small, nickel plated wrench can be used on brakes, derailleurs, etc.
Hole allows easy hanging on peg b

Offset Brake Wrenches OBW-2

We call the OBW-2 an offset wrench because of the unique design, which allows it to be used in tight places, such as centering caliper brakes.
OBW-2 has 11

This bench top accessory keeps small parts accessible and all in one place. 6” (15cm) in diameter and featuring an extra strong magnet, the MB-1 is available only in World Famous Park Tool Blue.

Offset Brake Wrenches OBW-3

We call these our offset wrenches because of their unique design, which allows them to be used in tight places, such as centering caliper brakes.
OBW-3 has

Spoke, Bearing, and Cotter Gauge SBC-1

This handy shop aid is ideal for sizing spokes, ball bearings and crank cotters.
To use, just hang the head of the spoke in the oblong hole and

Road wrench RW 1

The RW-1 is a 32mm head wrench and 15mm pedal wrench.
An ideal head and pedal wrench to carry along.
Small size fits in small bag, or mounts under water bottle

Road wrench RW 3

The RW-3 is a 36mm head wrench and 15mm pedal wrench.
An ideal head and pedal wrench to carry along.
Small size fits in small bag, or mounts under water bottle

TAP-7 // 3mm x .5 for rear wheel drop-out alignment screws
TAP-8 // 5mm x .8 for water bottle, toe clip, fender and rack bosses
TAP-9 // 6mm x 1 for cantilever brakes and large fender bosses

Third Hand Brake Tool BT-1

The BT-1 holds caliper brake shoes against the rim while installing the cable.
Vinyl coating is easy on the hands and smooth edges allow it to be easily att

ITEM # PAW-12
Adjustable Wrench Big and powerful, the PAW-12 is forged from carbon steel and chrome

We’ve designed the perfect shop hammer!
The HMR-1 is built with a fiberglass, reinforced shaft and a soft-touch rubber hand grip. A unique, two-sided head with both steel and rubber striking su

A professional quality 10mm bit with chamfered edges for a smooth and precise fit. Fits most freehub bodies for removal from hub. 3/8" drive square.

Axle Vise AV-1

This tool holds the axle so it will not turn while work is done on the hub.
It has two different diameter receptacles so it will work on front and rear axles.
Alu

ITEM # MLP-1
Master Link Pliers Many

Brake Toe-In Tool BT-3

The Brake Toe-In-Tool is used for aligning caliper brake pads in relation to the rim.
Brake pads that are perfectly parallel to the rim will "squeal.
" Par

Adaptateurs de forme conique. Se fixent sur les supports d'axes en forme de "V" des dévoileurs Park Tool TS-2 ou TS-2.2, permettant au centr

Mini Chain Brute Chain Tool CT-5

This small chain tool goes anywhere and actually performs like a shop quality tool.
The fine thread, special "V"-shaped handle, and super strong repla

Chainwhip/Freewheel & Lockring Remover SR-1

This combination chain whip and freewheel/lockring remover wrench is heat treated to prevent bending and flexing.
It also features hardened

ITEM # TWS-2
Star-Shaped Wrench Set

Ratcheting Metric Wrench RMW-1

A small, quality hand wrench with 8mm and 10mm sockets. Fits many nuts and bolts throughout the bicycle.
Useful on brakes, derailleurs, etc.
Chro

Specially designed, and precisely manufactured to gently adjust bent or damaged brake rotors. Each DT-2 features two different slot depths laser cut from high quality stainless steel. Center handle is

ITEM # PP-1
Hydraulic Piston Press

Handlebar Holder HBH-2

The Handlebar Holder is designed to hold the handlebars stationary, keeping the front wheel from &

The Cyclone

The patented Cyclone Chain Scrubber is made with a tough plastic nylon and has replaceable cleaning brushes, Part RBS-5 Replacement Brush Set, for extended product life.
Th

ITEM # JH-1
Bench Top Small Parts Holder A great place to keep small parts, cable end caps

A professional quality, laser-cut bit made to work with our TW-2 Torque Wrench, or other wrenches with a 3/8" square drive fitting. 32mm eight-point fitting gives a powerful and precise grip. Laser en

A professional quality, laser-cut bit made to work with our TW-2 Torque Wrench, or other wrenches with a 3/8" square drive fitting. The 36mm eight-point fitting gives a powerful and precise grip.

A professional quality, laser-cut bit made to work with our TW-2 Torque Wrench, or other wrenches with a 3/8" square drive fitting. The 36mm six point fitting gives a powerful and precise grip. Laser

ITEM # TNS-1
Threadless Nut Setter

Saw guide

Heat treated for long life, the guide cleans the freshly cut threads upon removal so headset parts install easily.
Guides are also available as a set

Chain Checker CC-2

To alleviate poor shifting and uneven train wear, most manufacturers recommend chain replacement at or before 1 percent stretch.
Now you can quickly and accurately

ITEM # AV-4
Heavy Duty Axle and Pedal Vise Designed to securely hold 5/16” to 9/16” axles

ITEM # SG-7
Oversized Adjustable Saw Guide Accurately guides a hack saw

Pedal wrench

Made from investment cast steel and reinforced with extra material at the highly stressed openings for a shop quality pedal wrench made to last.
15mm and 9/16 inch precis

Shop Tire Tool TL-10

Install and remove.
The heavy duty TL-10 Shop Tire Tool quickly and easily removes any bicycle tire (20? and larger) from the rim and then mounts the tire with th

Because of the tremendous force needed to remove chain pins, our Screw Type Chain Tool is made from investment cast steel. Along with superior strength and durability, the CT-3 features a handy “loos

ITEM # CG-2
Chain Gang Cleaning System A dirty drivetrain causes poor shifting and unneces

Professional Cable and Housing Cutter
The CN-10 Cable and Housing Cutter is a shop quality cutter designed specifically for use on all bicycle cables and housing, including hard-to-cut index housi

Once you try on this apron, there’s no going back to standard aprons. The SA-3 is made from heavy 10 oz. cotton canvas and has two rows of bar tack reinforced pockets for stashing pens, parts, tools,

Pedal Wrench PW-4

The new PW-4 Professional Pedal Wrench is designed for heavy shop use.
Two 15mm wrench openings are oriented at 30 degree and 45 degree angles so the user can always

Sprocket Remover SR-2

This shop quality chain whip gives you incredible leverage without worry of slipping.
Heavy duty, heat treated head with a round vinyl coated handle.
Harde

MG-1 Nitrile Gloves keep hands free of grime and protected from potentially harmful chemicals and solvents. MG-1 Nitrile Gloves are thin enough to maintain finger

Clean out or restore damaged threads in crank arms with these pedal taps. These taps can be used with either steel or alloy crank arms and are available in two popular sizes: 1/2” and 9/16” in both

Threadless Fork Saw Guide SG-6

Designed to ensure a straight, clean cut on threadless forks, the SG-6 fits 1", 1-1/8" and 1-1/4" forks. A must for use with threadless fork systems.
Si

Cable Stretcher BT-2

Commonly referred to as a "4th Hand", the Park Tool Cable Stretcher pulls both gear and brake cables tight .
It features one-hand operation with a thumb lock to h

ITEM # RT-1
Head Cup Remover

Torque Wrench Because torque specifications are now given for most parts and accessories, Park Tool offers two

Park Pack Mini Tool Kit PPM-2

The PPM-2 features an improved spoke wrench; lighter tire levers; 8mm, 9mm, and 10mm open end wrenches; a bottle opener; a tire boot; and a smaller tool wallet

CT-7 Screw Type Chain Tool for 3/16 and 1/8 BMX/ Freestyle Chains

The CT-7 Chain Tool is specifically designed to work on the wide and tall 3/16" BMX/freestyle chains now becoming popular.