Park Tool General Tools

Shop quality screwdriver designed for comfort and durability. Featuring dual density grips and heat-treated, chrome vanadium tips and shafts.
The #0 is a 1/8" shaft, for those small comp

Metric Wrench CBW-1

The CBW-1 is an 8mm open and 10mm open end wrench. This small, nickel plated wrench can be used on brakes, derailleurs, etc. Hole in wrench allows easy hanging on peg b

ITEM # RR-12
Tape Measure Small and handy, the RR-12 features a tough, composite housing a

HR 8 Hex wrench 8 mm

This is a professional quality, L-shaped, 8mm hex wrench for installing and removing crank bolts with an 8mm socket.
Special "speed bearing" attachment facilitat

Double-ended cone wrench

These 11/12mm double ended cone wrenches are designed for the home mechanic or occasional user.
They're made of thin tool steel and are nickel-plated for long

Metric Wrench CBW-4

The CBW-4 is a 9mm open and 11mm open end wrench.
This small, nickel plated wrench can be used on brakes, derailleurs, etc.
Hole allows easy hanging on peg b

Offset Brake Wrenches OBW-2

We call the OBW-2 an offset wrench because of the unique design, which allows it to be used in tight places, such as centering caliper brakes.
OBW-2 has 11

Pin Spanner SPA-1

The green handled SPA-1 fits adjusting cup on many adjustable type bottom brackets.
The pin ends are round with a diameter of 2.9mm.
Park Tool Pin Spanners hav

Pin Spanner SPA-2

The SPA-2, with red handle, will fit one-key release retaining rings on Shimano® and Campagnolo® cranksets and the adjusting cone on most freewheel clusters (not freehubs)

Shop Cone Wrench 13mm SCW-13

The standard of the industry, Park Tool Shop Cone Wrenches are unmatched in quality and performance.
The special Y head design puts more material where it

ITEM # HT-6
Hex Tool, 6mm Specially designed for cranks and pedals the HT-6 tool

ITEM # HT-8
Hex Tool, 8mm Specially designed for cranks and pedals the HT-8 tool is built

Hex Wrench Set AWS-3

It features three new size hex wrenches (2mm, 2.5mm, and 3mm) and a comfortable center.
Hex extensions are vinyl coated for comfort.

Hex Wrench Set AWS-1c

The AWS-1c features three common sized hex wrenches (4mm, 5mm, and 6mm)
and the Y shape gives you extra leverage for tight bolts.
Hex extensions are vinyl

TAP-7 // 3mm x .5 for rear wheel drop-out alignment screws
TAP-8 // 5mm x .8 for water bottle, toe clip, fender and rack bosses
TAP-9 // 6mm x 1 for cantilever brakes and large fender bosses

ITEM # HT-10
Hex Tool, 10mm Specially designed for cranks and pedals the

ITEM # UK-1
Utility Knife It folds, it cuts, it hangs on your belt and best of all…it’s b

Shop Hammer

Adjustable Spanner SPA-6

This spanner uses hardened, replaceable pins.
Designed for heavy-duty use, the distance between pins is adjustable, allowing use on virtually any bottom brack

Professional Hex Wrench Set HXS-1

You won't find better L-shaped hex wrenches than these.
In sizes especially for the bicycle mechanic (2, 2.5, 3, 4, 5, 6, 8, and 10mm), these wrenche

ITEM # JH-1
Bench Top Small Parts Holder A great place to keep small parts, cable end caps

ITEM # PAW-12
Adjustable Wrench Big and powerful, the PAW-12 is forged from carbon steel and chrome

Once you try on this apron, there’s no going back to standard aprons. The SA-3 is made from heavy 10 oz. cotton canvas and has two rows of bar tack reinforced pockets for stashing pens, parts, tools,

Professional Hex Wrench Set with Bench Mount/Wall Mount Wrench Holder HXS-2

The new HXS-2 contains the same professional L-shaped hex wrenches as our HXS-1 (2, 2.5, 3, 4, 5, 6, 8 & 10mm) b

MG-1 Nitrile Gloves keep hands free of grime and protected from potentially harmful chemicals and solvents. MG-1 Nitrile Gloves are thin enough to maintain finger

Clean out or restore damaged threads in crank arms with these pedal taps. These taps can be used with either steel or alloy crank arms and are available in two popular sizes: 1/2” and 9/16” in both

Most headset wrenches are too thin to use on the top locknut of headsets, particularly aluminum locknuts which can be marred and rounded off very easily. The HW-2 Professional Headset Locknut Wrench i

Kit complet de clés en étoiles TORX. Les clés PH-T ont une poignée en "P" conçue pour vous apporter un maxim

ITEM # MW-SET
Metric Wrench Set World famous Park Tool quality wrapped up in a great set o

Hex Wrench Set PH-1

These thoughtfully designed P-handled hex wrenches fit the task at hand, as well as they fit in your hand.
All the wrenches fit neatly in the bench mount/ wall mo

Shop Cone Wrench Set SCW-SET

The standard of the industry, Park Tool Shop Cone Wrenches are unmatched in quality and performance.
The special Y head design puts more material where it

Tire seater

This tool is designed to quickly and easily seat stubborn tires.
During inflation tire beads often slip below the rim edge and are difficult to pull out.
Simply plac

ITEM # DAG-2
Derailleur Hanger Alignment Gauge The De